Nexus 9 is lucky enough to have got the Android 7.1.1. The 9-inch phablet has handled to impress many individuals across the globe. now with the most recent Android version in its pocket, the device has become rather unbeatable compared to other tablets in its range.
A new build from Google is right here with the build number NMF26F, based on the most recent Android 7.1.1 Nougat. Google Pixel is another device to have received a similar firmware update. The update brings numerous bug fixes and stability improvements.
However, if you have customized your stock firmware or have rooted your device, then there are possibilities that you may not get the update over the air. In purchase to install the newest available firmware on your Nexus device and bring back your device to stock, flashing factory picture is the easiest choice available. If you have installed a customized ROM then this will assist you revert back to everything stock.
So today in this article, we’ll describe exactly how you can set up Android 7.1.1 Nougat factory picture on Nexus 9 WiFi Tablet.
Download Nexus 9 WiFi Android 7.1.1 factory Image
Download Nexus 9 Wifi Android 7.1.1 factory Image
Prerequisites
Set up ADB and Fastboot on your computer. You can download the full Android SDK from here, or get the quick ADB and fastboot installer from here. For Mac or Linux OS, click here.
Install Nexus USB chauffeurs on your computer.
Open Settings> designer choices and enable USB Debugging on your device.
Go to designer choices and enable Allow oem unlock, if this choice is available.
Install Android 7.1.1 factory picture on Google Nexus 9 WiFi
Download the factory picture from above and transfer it to your PC.
Make sure you have configuration ADB and fastboot on your PC. Also, accept Always allow from this computer when you plug in the device for the first time to enable USB Debugging.
Now power off your device and unplug it from your PC.
Boot into the bootloader or fastboot mode. To do so, press and hold volume down/up and the power button at the same time for 5-6 seconds. When you see the bootloader screen, connect your device to the PC utilizing a USB cable television (Choose fastboot if choice is available). You can also problem the following code while linked to the PC, to boot into the bootloader.
adb reboot bootloader
Now plug in your device to the PC and let the chauffeurs install.
Navigate to the place where you have put the factory image file on PC and extract it to get data with .img.
While the folder with the extracted factory picture is open, run the flash-all.bat file on Windows PC and confirm the flashing process. wait on the process to complete. If you utilize Linux or Mac OS, run the flash-all.sh file and follow the instructions.
Once done, reboot the device normally. when you see the new boot logo, that implies the system has successfully been installed.
First boot may take a while, so be patient. You may also requirement to unlock the bootloader on your Nexus 9. To do so, problem the command “fastboot oem unlock”. If you requirement to lock the bootloader, just problem the command “fastboot oem lock“, while your device is connected.
If you have any queries, then you can ask in a comment section.